,

Single Hydraulic Trailer Jack Standard Kit


*Free Shipping in the Lower 48 States*

$1,245.00

*Free Shipping in the Lower 48 States – Remote Locations may Require an Addition Fee*

Lift your heavy duty trailer at the push of a button with the Single Hydraulic Trailer Jack Standard Kit . If you need to build a trailer or replace existing jacks, these jacks are perfect for most applications. Whether you are using these jacks for livestock, horse, car, cargo, dump or even flatbed gooseneck trailers, adding these hydraulic jacks is an easy set up and easy to use.

Single Hydraulic Trailer Jack Standard Kit Includes:

  • (1) Hydraulic Power Unit (HPU) Double Acting Pump (Power-Up / Power-Down)
    • 3,200 psi relief setting on the extend (raising) port
    • 1,500 psi relief setting on the retract (lowering) port
  • (1) 12,000 lb Trailer Jack with 2″x 20″ Hydraulic Cylinder
  • (1) 15″ Rubber Strap
  • (2) 48″ Hydraulic Hose w/2 Straight #6 JIC Fittings
  • (2) 90 Degree Fittings – #6 SAE male X #6 JIC male
  • (2) Straight Adapter Fittings – #6 SAE male X #6 JIC male
  • (1) Battery Cable, 4 gauge RED, 20″
  • (1) Battery Cable, 4 gauge BLACK 20″
  • (1) Jack Cover
  • Maximum Hydraulic Flow Rate is 2 GPM
  • Maximum Distance between ground and bottom of trailer frame is 8″

 

Hydraulic Trailer Jack Manual

Installation Instructions: For 12 VDC, Hydraulic Power Units, Double-Acting (Power UP / Power DOWN)

Please contact us if you have any questions we can assist you with. (602) 292-9690

Premium Supply Hydraulic Trailer Jack Manual

Recommended Oils For KTI Hydraulic Pumps

How To Perform The Bleed Cycle On Your KTI Hydraulic Pump In 3 Steps

Installation Instructions: For 12 VDC, Hydraulic Power Units, Double-Acting (Power UP / Power DOWN)

  • Maximum Hydraulic Flow Rate 2 GPM
  • Maximum Pressure For “Raising” Portion of Cycle 3200 PSI – Port A
  • Maximum Pressure For “Lowering” portion of Cycle 1500 PSI – Port B
  • Maximum Distance between ground and bottom of trailer frame is 8″

You may also like…